View IRF63006_4792017.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

IRF630 IRF630FP
N-channel 200V - 0.35 - 9A TO-220/TO-220FP Mesh overlayTM II Power MOSFET
General features
Type IRF630 IRF630FP

VDSS 200V 200V
RDS(on) <0.40 <0.40
ID 9A 9A
3 1 2
1 2 3
Extremely high dv/dt capability Very low intrinsic capacitances Gate charge minimized
TO-220
TO-220FP
Description
This power MOSFET is designed using the company's consolidated strip layout-based MESH OVERLAYTM process. This technology matches and improves the performances compared with standard parts from various sources.
Internal schematic diagram
Applications
Switching application
Order codes
Part number IRF630 IRF630FP Marking IRF630 IRF630FP Package TO-220 TO-220FP Packaging Tube Tube
August 2006
Rev 9
1/14
www.st.com 14
Contents
IRF630 - IRF630FP
Contents
1 2 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.1 Electrical characteristics (curves) ............................ 6
3 4 5
Test circuit
................................................ 9
Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
2/14
IRF630 - IRF630FP
Electrical ratings
1
Electrical ratings
Table 1.
Symbol VDS VDGR VGS ID ID IDM
(2)
Absolute maximum ratings
Value Parameter TO-220 Drain-source voltage (VGS = 0) Drain-gate voltage (RGS = 20 k) Gate-source voltage Drain current (continuous) at TC = 25C Drain current (continuous) at TC=100C Drain current (pulsed) Total dissipation at TC = 25C Derating factor 9 5.7 36 75 0.6 5 --65 to 150 150 2000 200 200 20 9(1) 5.7(1) 36(1) 30 0.24 TO-220FP V V V A A A W W/C V/ns V C Unit
PTOT
(3)
dv/dt
Peak diode recovery voltage slope Insulation winthstand voltage (DC) Operating junction temperature Storage temperature
VISO TJ Tstg
1. Limited only by maximum temperature allowed 2. Pulse width limited by safe operating area 3. ISD di/dt 9A, 300A/s, VDD V(BR)DSS, Tj TJMAX
Table 2.
Symbol Rthj-case Rthj-a Rthc-sink Tl
Thermal data
Value Parameter TO-220 Thermal resistance junction-case Max Thermal resistance junction-ambient Max Thermal resistance case-sink typ Maximum lead temperature for soldering purpose 1.67 62.5 0.5 300 TO-220FP 4.17 C/W C/W C/W C Unit
Table 3.
Symbol IAR EAS
Avalanche characteristics
Parameter Avalanche current, repetitive or not-repetitive (pulse width limited by Tj Max) Single pulse avalanche energy (starting Tj=25C, Id=Iar, Vdd=50V) Value 9 160 Unit A mJ
3/14
Electrical characteristics
IRF630 - IRF630FP
2
Electrical characteristics
(TCASE=25C unless otherwise specified) Table 4.
Symbol V(BR)DSS IDSS IGSS VGS(th) RDS(on)
On/off states
Parameter Drain-source breakdown voltage Zero gate voltage drain current (VGS = 0) Gate body leakage current (VDS = 0) Gate threshold voltage Static drain-source on resistance Test conditions ID = 250 A, VGS= 0 VDS = Max rating, VDS = Max rating @125C VGS = 20V VDS= VGS, ID = 250A VGS= 10V, ID= 4.5A 2 3 0.35 Min. 200 1 50
100
Typ.
Max.
Unit V A A nA V
4 0.40
Table 5.
Symbol gfs (1) Ciss Coss Crss td(on) tr Qg Qgs Qgd
Dynamic
Parameter Forward transconductance Input capacitance Output capacitance Reverse transfer capacitance Turn-on Delay Time Rise Time Total gate charge Gate-source charge Gate-drain charge Test conditions VDS > ID(on) x RDS(on)max, ID = 4.5A Min. 3 Typ. 4 540 90 35 10 15 31 7.5 9 700 120 50 14 20 45 Max. Unit S pF pF pF ns ns nC nC nC
VDS =25V, f=1 MHz, VGS=0
VDD = 100V, ID = 4.5A, RG = 4.7, VGS = 10V (see Figure 14) VDD=160V, ID = 9A VGS =10V
1. Pulsed: pulse duration=300s, duty cycle 1.5%
4/14
IRF630 - IRF630FP
Electrical characteristics
Table 6.
Symbol ISD ISDM(1) VSD(2) trr Qrr IRRM
Source drain diode
Parameter Source-drain current Source-drain current (pulsed) Forward on voltage Reverse recovery time Reverse recovery charge Reverse recovery current ISD=9A, VGS=0 ISD=9A, di/dt = 100A/s, VDD=50V, Tj=150C (see Figure 16) 170 0.95 11 Test conditions Min Typ. Max 9 36 1.5 Unit A A V ns C A
1. Pulse width limited by safe operating area 2. Pulsed: pulse duration=300s, duty cycle 1.5%
5/14
Electrical characteristics
IRF630 - IRF630FP
2.1
Figure 1.
Electrical characteristics (curves)
Safe operating area for TO-220 Figure 2. Thermal impedance for TO-220
Figure 3.
Safe operating area for TO-220/FP
Figure 4.
Thermal impedance for TO-220/FP
Figure 5.
Output characterisics
Figure 6.
Transfer characteristics
6/14
IRF630 - IRF630FP Figure 7. Transconductance Figure 8.
Electrical characteristics Static drain-source on resistance
Figure 9.
Gate charge vs gate-source voltage Figure 10. Capacitance variations
Figure 11. Normalized gate threshold voltage vs temperature
Figure 12. Normalized on resistance vs temperature
7/14
Electrical characteristics
IRF630 - IRF630FP
Figure 13. Source-drain diode forward characteristics
8/14
IRF630 - IRF630FP
Test circuit
3
Test circuit
Figure 15. Gate charge test circuit
Figure 14. Switching times test circuit for resistive load
Figure 16. Test circuit for inductive load Figure 17. Unclamped Inductive load test switching and diode recovery times circuit
Figure 18. Unclamped inductive waveform
Figure 19. Switching time waveform
9/14
Package mechanical data
IRF630 - IRF630FP
4
Package mechanical data
In order to meet environmental requirements, ST offers these devices in ECOPACK(R) packages. These packages have a Lead-free second level interconnect . The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com
10/14
IRF630 - IRF630FP
Package mechanical data
TO-220 MECHANICAL DATA
DIM. A b b1 c D E e e1 F H1 J1 L L1 L20 L30 mm. MIN. 4.40 0.61 1.15 0.49 15.25 10 2.40 4.95 1.23 6.20 2.40 13 3.50 16.40 28.90 3.75 2.65 3.85 2.95 0.147 0.104 TYP MAX. 4.60 0.88 1.70 0.70 15.75 10.40 2.70 5.15 1.32 6.60 2.72 14 3.93 MIN. 0.173 0.024 0.045 0.019 0.60 0.393 0.094 0.194 0.048 0.244 0.094 0.511 0.137 0.645 1.137 0.151 0.116 inch TYP. MAX. 0.181 0.034 0.066 0.027 0.620 0.409 0.106 0.202 0.052 0.256 0.107 0.551 0.154
oP
Q
11/14
Package mechanical data
IRF630 - IRF630FP
TO-220FP MECHANICAL DATA
mm. MIN. 4.4 2.5 2.5 0.45 0.75 1.15 1.15 4.95 2.4 10 16 28.6 9.8 2.9 15.9 9 3 30.6 10.6 3.6 16.4 9.3 3.2 1.126 .0385 0.114 0.626 0.354 0.118 TYP MAX. 4.6 2.7 2.75 0.7 1 1.7 1.7 5.2 2.7 10.4 MIN. 0.173 0.098 0.098 0.017 0.030 0.045 0.045 0.195 0.094 0.393 0.630 1.204 0.417 0.141 0.645 0.366 0.126 inch TYP. MAX. 0.181 0.106 0.108 0.027 0.039 0.067 0.067 0.204 0.106 0.409
DIM. A B D E F F1 F2 G G1 H L2 L3 L4 L5 L6 L7 O
A
B
L3 L6 L7
F1 F
D
G1 H
F2
L2 L5
E
123
L4
12/14
G
IRF630 - IRF630FP
Revision history
5
Revision history
Table 7.
Date 09-Sep-2004 03-Aug-2006
Revision history
Revision 8 9 Complete version New template, no content change Changes
13/14
IRF630 - IRF630FP
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
(c) 2006 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com
14/14

▲Up To Search▲

Price & Availability of IRF63006

	To Download IRF63006 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .